FAQ's

Have a question to ask? Check out our FAQs below. If your question is not there then contact the Vittoria team here.

Quick Start Guide

Clean Water Tank

  • Remove the water tank and rinse with hot water

  • Dry and allow to cool

  • Fill tank with cold tap water

  • Place the tank onto the machine. Ensure it is securely in place

Switching on the Machine

  • Ensure the power switch on the side of the machine and wall socket is off

  • Plug the electrical cord into the machine and wall socket. Switch both 'ON'

  • The two buttons on the top of the machine will start flashing blue, indicating it is pre-heating

  • Once the button stops flashing press one of the buttons to run water through the machine

Making Coffee

  • Lift the silver lever until it is fully extended

  • Place the capsule in the machine by dropping it from a close distance

  • Close the lever until it clicks into place

  • Press the button on the left.

  • The first coffee should be discarded

  • Refer to the programmable pour function in the your manual to adjust the amount of coffee extracted. 30ml is recommended

Ejecting the Capsule

  • Once the coffee is completely extracted, lift the lever to eject the capsule

  • Wait approximately 30 seconds before ejecting to avoid leaking

  • The capsule discard bin holds a maximum of 10 capsules

How do I use my Espressotoria® Machine?

Nov 13, 2015, 11:58 AM

Quick Start Guide

Clean Water Tank

  • Remove the water tank and rinse with hot water

  • Dry and allow to cool

  • Fill tank with cold tap water

  • Place the tank onto the machine. Ensure it is securely in place

Switching on the Machine

  • Ensure the power switch on the side of the machine and wall socket is off

  • Plug the electrical cord into the machine and wall socket. Switch both 'ON'

  • The two buttons on the top of the machine will start flashing blue, indicating it is pre-heating

  • Once the button stops flashing press one of the buttons to run water through the machine

Making Coffee

  • Lift the silver lever until it is fully extended

  • Place the capsule in the machine by dropping it from a close distance

  • Close the lever until it clicks into place

  • Press the button on the left.

  • The first coffee should be discarded

  • Refer to the programmable pour function in the your manual to adjust the amount of coffee extracted. 30ml is recommended

Ejecting the Capsule

  • Once the coffee is completely extracted, lift the lever to eject the capsule

  • Wait approximately 30 seconds before ejecting to avoid leaking

  • The capsule discard bin holds a maximum of 10 capsules